Guangzhou Tingmay Beauty Equipment Co., Ltd.
Main products:E-Light Machine,Slimming Machine,Multi-Function Machine
Products
Contact Us
  • Contact Person : Mr. ning mark
  • Company Name : Guangzhou Tingmay Beauty Equipment Co., Ltd.
  • Tel : 86-20-61196680
  • Fax : 86-20-36517974
  • Address : Guangdong,guangzhou,#8,School North Road, Jiangxia Town,Baiyun District,Guangzhou,China
  • Country/Region : China
  • Zip : 510010

vacuum liposuction body contouring med beauty equipment

vacuum liposuction body contouring med beauty equipment
Product Detailed
vacuum liposuction body contouring med beauty equipment 1-automatic vacuum rf roller 2-2012 newest velashpe 3-body contouring

vacuum liposuction body contouring med beauty equipment1-automatic vacuum rf roller2-2012 newest velashpe3-body contouring

This chapter is the system instruction for Sliming-V10 , Operators and Maintenance Technician must ready and familiar it.Treatment Principle of Vacuum Body Slimming Machine V10-cellulite reduction,body shaping1.Infrared laser lowers skin impedance by heating skin and RF energy penetrates deeply into connective tissue.2.The synergistic combination of infrared laser and conducted RF energy increases the oxygen intracellular diffusion by heating skin. 3.The technology that vacuum folds skin makes RF energy penetrate a specific folded skin, significantly improving effect and safety, even for the upper eyelid area treatment. 4.Vacuum plus specially-designed rollers manipulate leads even RF penetration (5-15mm). Meanwhile, vacuum and roller mechanical tissue manipulation nips and stretch fibrillar connective tissue, effectively break down subcutaneous fat as well as extruded capillary vessel, increase lymphatic drainage, promote metabolism and reduce or shrink the size of the actual fat chamber, thereby greatly improving body shaping effect.

    

1.1  Instruction hand piece 

1.1.1 hand piece 

1) How to use the hand piece 1&2 

a) push“up”,“down”,to choose a parameter you need;

b) push “  ”,“  ”,to regulate a parameter;

c) finish regulating a parameter,push“Enter”into working status. 

d) of course ,you may on instrument screen to finish regulating a parameter.

e) on working status,you may not to regulate a parameter.

1) Instruction screen for hand piece 1:(picture a)

A:standby;                            B:ready;

C:absolute value of pressure;             D:pulse time;

E:Roller speed;                         F:pressure level;

G:laser power output;                 H:RF energy output;

I:working time.

1.1.2 Hand piece 2

1) Instruction screen for hand piece 2:(picture b)

A: standby;                               B:ready;

C: pulse time;                             D:absolute value of pressure;

E: pressure level;                          F: laser power output;

G: RF energy output;                        H: working time; 

1.2  parameter

1) screen:

1. instrument screen: 10.4″TFT

2.  The screen for hand piece:

§ The screen for hand piece 1: 2.4″

§ The screen for hand piece 2:  1.9″

2) Working mode:       pulse sequence

Pulse spread:        0.5s-7.5s

3) Negative pressure:

1. absolute value:        80kPa -10kPa(60.8Hg -7.6Hg);

2. the relative value:     20kPa -90kPa(15.2Hg -68.4Hg);

4) Roller  speed:          0-36rpm

5) Roller working Pattern:    2 kinds

6) safety checking:          On line

7) RF frequency:             1MHz   

8) RF energy density:        Max60J/cm3 

9) Laser wavelength:        940nm

10) Laser power:             Max 20W

11) Hand piece quantity:       4

12) Therapy square measure:  4mmx7mm,8mmx25mm,30mmx50mm,40mmx60mm 

13) IC card  System

14) Input power :           750VA

15) Power supply:            AC230V±10%,50Hz±1Hz/ AC110V±10%,60Hz±1Hz

16) Net weight:              50kg

17) Size:                   405mm×460mm×1100mm

vacuum liposuction body contouring med beauty equipment



Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.